Welcome to New Sunshine LED Lighting Company

New Sunshine LED Lighting Inc

Specializing in the production of LED Fishing Light, Working lights, LED Corn Light,LED grow lights and other lighting manufacturers,Our products include LED corn bulbs, E26/27 and E39/40 base retrofit kits, smart LED lighting, temporary site lighting

What should I do if the led lamp does not light up or is dimly lit?

22/09/2022 by 内斯勒
No Comments

LED lamps are very common lamps in modern life. Why LED lamps may not be bright or weak during use?

  1. What is the reason why the led light does not light up?
  2. The packaging and protection of the LED light strip is not perfect, causing the lamp beads to be damaged by collision during transportation.
  3. The solder joints of the LED light bar have virtual soldering. The vibration during transportation causes the solder joints to fall off and the light strip does not light up.
  4. The quality of the solder is poor. During the bending process of the LED, the solder joints are easy to crack and fall off.
  5. The bending angle is too large during installation, which leads to the separation of the solder joint of the LED light bar from the copper foil during installation, resulting in no light.
  6. The solder resist layer of the LED light strip circuit board is too thick, and the solder and the circuit board cannot be completely integrated during welding, which is also a phenomenon of virtual welding.

The led light is not bright, but how to fix the weak light?

 

1.Replace with a new light strip

If it is said that because of the led, if the light strip in the lamp is aged or damaged, you can only replace the light strip in the lamp tube without replacing the lamp housing. You can buy the appropriate type of light strip yourself, cut off the power, remove the screws with a screwdriver, remove the bad light strip, and replace it with a new one.

  1. Replace the drive power with a new one

Sometimes it is not because the led light is broken that it does not light up, but there is a problem with the driving power supply. At this point, you can check whether the drive power supply is damaged. If it is already broken, replacing the drive power supply of the same model can solve this problem.

  1. Replace with new led lights

If you want to solve it thoroughly and fastest, the best way is to buy new led directly and install the led if the light is not on, if you want to fix it, you need to check step by step if the light is not on The reason, and then take the relevant method according to the reason, it is time-consuming and laborious, and may not be repaired, it is better to buy a new one directly. This can better ensure that the LED light can be illuminated normally when used quickly, and will not affect our work and life.

If you need to buy LED lamps, you can come to our new sunshine

New Sunshine has been focusing on the R&D and production of various lamps for decades, with customers in more than 60 countries. It is a manufacturer integrating R&D, production and sales.

 

Leave a Reply

Your email address will not be published.