Welcome to New Sunshine LED Lighting Company

New Sunshine LED Lighting Inc

Specializing in the production of LED Fishing Light, Working lights, LED Corn Light,LED grow lights and other lighting manufacturers,Our products include LED corn bulbs, E26/27 and E39/40 base retrofit kits, smart LED lighting, temporary site lighting

How to install LED waterproof work light? What is the installation method?

16/11/2022 by 内斯勒
No Comments

LED waterproof light is a kind of waterproof function LED light. After purchasing this kind of lamp, don’t worry about installation, you should first understand its installation method and precautions before operation. The following new sunshine tells you how to install LED waterproof work light.

  1. Installation method of LED waterproof work light
  2. LED waterproof work light refers to the handle LED strip assembled FPC (flexible circuit board) or PCB on the hard board, their general model is about 5730.5050.3528 and other common types.
  3. The width of the four-wire LED waterproof light is about 22mm, the thickness is about 8mm, and the weight is about 0.25kg/m (4 meters per kilogram).
  4. The four-wire LED waterproof light has four wires, three rows of lights (not four rows of lights), 24 lights per row of 1 meter, 24*3=72. Because the power of each lamp bead is 0.05W, 72 beads The power of the LED strip is: 72*0.05=3.6W.
  5. When the LED light strip is installed, it is usually placed in the light trough, which can be upright or fixed with a thin rope or thin iron wire. If external or vertical mounting is required, a card and tail plug will need to be purchased. The original card is completely bright, it is best to apply waterproof glass glue on the tail plug and plug, and the waterproof function is better.
  1. LED waterproof work light installation precautions
  2. The waterproof light strip must wear a plug plug with a transformer, and the connection must remove the bright plastic cover, try to wait for the cover to be closed. Can not be directly connected, so it is easy to short circuit.
  3. There is a “hinge shear” mark per meter, which can only be cut on the mark. Errors or deviations can result in one meter of no light. Some people will deviate from the logo because the logo is wrong. It’s best to double-check the placement of the flags before cutting and cut according to the center where there is no connection.

Leave a Reply

Your email address will not be published. Required fields are marked *